1 / 2
Cyborg Girl - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to test the TD and 'blendabilty' of my white filament!
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 93
- Makes
- 0
- Views
- 726
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cyborg Girl
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
I wanted to test the TD and 'blendabilty' of my white filament and see the full layering effect that Hueforge was made for. This print absolutely did not disappoint!
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Sunlu Grey Transmission Distance: 1.4
- PLA Overture Light Grey Transmission Distance: 1.6
- PLA Sunlu Lilac Transmission Distance: 6.6
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #12 (1.04mm) swap to Grey
- At layer #15 (1.28mm) swap to Light Grey
- At layer #17 (1.44mm) swap to Lilac
- At layer #19 (1.6mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Category: Other