1 / 5
Clean Bowden Y-Splitter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same design as the AMS hub.
- Rating
- 4.625 / 5
- Likes
- 92
- Downloads
- 767
- Makes
- 9
- Views
- 6,840
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's.
- Screw the small part to the printer (see picture), remove existing screw first.
- Remove the coupler from the printer.
- Screw in the PC4-M6's to the middle part (surfaces aligned, see picture).
- Slide in the medium part from the right.
- Fully push the left bowden tube into the medium part (see picture).
- Fully push the other tubes into the medium part.
- Attach the cover (click in).
- Enjoy the clean design :-).
You must use “UNLOAD” when removing the external filament, not manual retract. This will give the filament a clean cut and it will not stuck in the splitter.
Remark: You can switch inputs if the filament doesn't travel smoothly enough.