1 / 5
Flsun v400 Better Cooling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flsun v400 Better Cooling for motherboard
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 158
- Makes
- 2
- Views
- 1,625
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
wanted to do this for a long time.
i added a blower fan exclusively for the motor drivers and used the original fan for the rest of the motherboard.
printed with eSUN PLA+ (yep i know pink :-)
the blower is connected via snap-ins.
the original fan is connected via screws (can be connected via several types)
print setup:
- no support needed
- 2 walls
- 0.2 layer
non printed parts:
- the blower fan of course 5015 24v
- 2x M3 20mm screw (for original fan - you can use other types)
- 2x M3 nuts (for original fan - you can use other types)
- 2x M3 8mm screw (to replace the original mount screws)
- really optional - i created 2 sockets for the 2 fans and 1 cord to the motherboard - you can fuse them together to the same socket or do what i did
results:
- cooling - in stall mode
- without cooling 43C
- with cooling 30C
- noise really depends on the fan that you will use. i didn't had an noticeable increase in noise
happy printing