LCD5110 (pcd8544) and "ESP D1 mini" open case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for 5110 LCD and ESP 8266 mini.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Open case for 5110 LCD and ESP 8266 mini. The holes are 2.5 mm diameter, I used some screws for plastic that I already have. The ESP board I have has 2 holes at each side. There are several models with different size. I attached the FreeCAD models if you need to adjust it.
The data shown is from Home Assistant via esphome. At first, I tried to add a button, but finally the information changed with a timer of 5 seconds. It’s possible to automate the page to show depending on if a sensor has data, too.
The duppont connector to the display is from @NERDCORNER_654082 :
https://www.printables.com/es/model/518876-connectors-edition-3-8-pin-dupont-jumper-cable