Prusa XL Buddy cover with vents and fan mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement XL Buddy box cover for the Prusa XL. - with a 40 x 40 fan mount - Vents - holder for a DC-DC converter
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 311
- Makes
- 3
- Views
- 2,974
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Found out that XL Buddy board, gets a bit hot while the XL is operating.
Around 85-90 °C, at least that's what the screen told me. I figured, why isn't this pretty beefy board compartment ventilated at all?
Made a new cover, retains the 2 bumps that keep the buddy boards secure in place, got a mount for a 40 x 40 Fan, some Vents and even a small mount for a DC-DC converter board I had on hand. I need that DC-DC converter only because the Fan I'm going to use is 12V only. Currently the Fan is hooked up to an external PSU anyway.
Now the Temperature is around 45°C while operation.
Should be printed in PETG, ABS or ASA.
PLA should be fine, especially if your going have a Fan running while the printer is on.
For mounting the fan i used M3 x 12 screws with a round head. The holes are 2.5mm, did tap em beforehand.