Gun4IR GCON45 Solenoid model 0530 Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a no cut mod support for a 0530 solenoid model to fit in a Namco GunCon45 made to be compatible with Gun4IR PCBs
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 143
- Makes
- 0
- Views
- 2,191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a no cut mod support for a 0530B solenoid model to fit in a Namco GunCon 45 made to be compatible with Gun4IR official PCBs.
The model is composed of two parts that are glued together on their flat surface for printing without support.
Assembly of the solenoid requires 2 M3x6mm screws to secure it.
I added a small piece of adhesive foam (approx. 5mm thick) to damper the Solenoid kickback.
So the print doesn't require support and is printed fine on my PRUSA Mini with PLA on 0.20 Quality preset at 15% infill. But to be honest, I haven't tried many settings. ;)
Small disclaimer: I am not a 3D modeler, the model was made with my own measurement of my Namco GunCon 45. It may not be perfect or be the smartest design and please be aware that it may require small adjustments.
Update - 12 october 2023:
This model was remixed by Lorien_ to add a neat support for the TMP36 temperature sensor, you can check it out here:
https://www.thingiverse.com/thing:6262312