1 / 5
ST7735 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case I made to house my ST7735 Displays. It snaps together requiring no glue and I used breadboard jumpers…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 179
- Makes
- 0
- Views
- 814
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a case I made to house my ST7735 Displays. It snaps together requiring no glue and I used breadboard jumpers to expose the pins since they were so short on the part.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Filament: Prusa PLA Black
Notes:
Snaps together. Use breadboard jumpers to expose pins
Category: DIY