4x4 Membrane Keypad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a keypad case I used to hold my 4x4 Membrane Keypad. It snaps together requiring no glue and you can insert a…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 88
- Makes
- 1
- Views
- 513
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a keypad case I used to hold my 4x4 Membrane Keypad. It snaps together requiring no glue and you can insert a stencil over the switch to change the key allocations. I built it for DIY and prototyping projects. It also supports some Inventr.io projects.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Filament: Prusa PLA Black
Notes:
This project uses bridges during printing so make sure that you can print bridges successfully. I route breadboard jumpers from the connector thru a hole in the back before snapping it together. This allows for longer cables since t he cable on the membrane switch is fragile.
Category: DIY