1 / 3
Adapter SW19-SW13 1/4"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter for M6 hexagon nuts with 9mm for a wrench with 13mm or a ratchet with 1/4". The Innerdiameter is 6.4mm so if you can't cut the rod it is still possible to tighten the nut.
Dimensions: Ø15x50mm
With 100% infill ca 7g
Worked with PLA quite well.