1 / 8
Prusa MK4 Y-Axis belt tensioner — image 1
1 / 8

Prusa MK4 Y-Axis belt tensioner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here is my solution for adjusting the belt tension of the Y-axis.

Rating
4.853 / 5
Likes
220
Downloads
907
Makes
37
Views
5,688
Reviews
34

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

To tension the Y-belt just turn the adjustment knob. Designed for the GT2-20 pulley (15mm diameter) with 3mm axis.

Printed with PETG, 15 % infill, 0,1 layer height recommended, 4 perimeter, no support needed.

You need for installation the two square nuts and screws from the original Y-idler. The top of the Housing is marked. 

 

November 15, 2023

added a new housing and nut shortened by 5 mm so that the left bearing of the carriage is the correct mechanical stop and not the nut. The retainer has remained the same.