1 / 2
Espresso Knock Box w/ TPU+PETG dowel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knock box remix with a TPU+PETG dowel
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 142
- Makes
- 3
- Views
- 1,018
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I liked @thenickdude's version of @deLamorDesign's knock box, but I didn't have any dowels on hand so I made my own.
I also wanted the dowel to have a rubber coating, like other knock boxes I've used, so I made a two-part design with a rigid inside and a 1.2mm thick TPU outside.
There is 0 tolerance built into the design as it's better to be a little too tight than too loose, so I had to use a little sandpaper to clean up the knock box holes for this to fit. If your printer is better calibrated than mine, you might not need that.