1 / 3
SecKit Cube CPAP Part Cooler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows the SecKit cube to utilize the chamber vent as an input for a part-cooler using a 15mm CPAP hose.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
You'll want to:
- Use ABS filament or a filament that can be glued.
-Use 15mm CPAP hose.
-The CPAP hose is modeled in Fusion 360 as a CCW Coil with 6mm Pitch, 17.1mm Diameter, and a 2.5mm section size. This lets you screw the hose into the fitting and replace it if needed.
- Convert the Bondtech/Bondtech Clone extruder to use M4 studs for the part cooler mount, but honestly you may want to just use a different cooler mine uses a custom-made brass nozzle from brass tubing...
Category: 3D Printer Parts