1 / 4
Stepper braces for Seckit Cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These braces firmly affix the steppers to the frame of the SecKit Cube.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I originally had the BTT s42c, closed-loop steppers and, frankly, they were terrible; little documentation, surface artifacts, and noisy.
Swapped them for some TMC 2209's and 0.9* steppers and all those problems went away.
However, there's no good way to tension the belts and using the stepper mounts to do this left them torqued and rotated. These braces push the steppers against the ends of the screw slots and fixes them much more firmly against the frame.
Category: 3D Printer Parts