Dog Poo Bag Holder/Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.00 – €3.66 net (excluding VAT)
For file: dog bag holder_0.4n_0.15mm_PLA_MK4IS_3h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.33 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 3.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a dog poo bag holder that fits what I believe is the standard size rolls (~60mm tall with ~30mm radius).
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 143
- Makes
- 2
- Views
- 667
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
This one is designed to be printed with tree supports and the results are fantastic on my MK4. I printed mine in Overture Professional PLA (Electric Blue) and it's nearly flawless.
The dispensing window works well. There's also a pair or lanyard holes at the top (opposite the end-cap) for attaching to your leash or whatever you like.
I use two washers to separate the roll tube from the ends of the holder. However, you could easily print some washers instead, I recommend 1.4mm height with an ID of 6.5mm and an OD of 16-20mm.
I'm attaching a STEP file of the model so you can make adjustments for your situation =)