DJI Controller RC Antenna Clamp - Floppy antenna fix

This clamp fixes the floppy RC antennas on DJI RCs.
It works by clamping the antenna hinge and increasing friction.
I've tested it on Inspire 2 controllers, but it looks like the antenna design hasn't changed for DJI controllers similar to it.
You can check if it works on yours by measuring the antenna's base (as seen in pictures where the clamp attaches). The antenna base on Inspire 2 is 9.5 mm thick, 14 mm wide, and an elliptical shape. It's a tight fit to slide it down from the top. I had to use pliers to move it the last few millimeters.

I've confirmed it is working on:
DJI Inspire 2 controller

I guess it should work on:
DJI Inspire 1 controller
DJI Phantom controllers (all generations)
DJI FPV system controllers
DJI Matrice controllers
DJI Cendence controllers

If it works on yours, let me know, and I'll update the list.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament:

Prusament PETG Urban Grey

Notes:

Category: R/C Vehicles