UK Light switch cover compatible with Philips Hue v2 dimmer switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting plate to cover a UK light switch, designed for the Hue v2 dimmer switch.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 1
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I bought a new Philips hue v2 switch and wanted to mount it over my light switch. This is designed for a typical UK single switch with 60mm screw spacing. I am releasing this as a WIP until there's enough feedback to confirm it's compatible with most switches found in UK homes.
You will need to detach the small metal piece from the holder that comes with the switch, then glue to the back of the print in the locating recess. Only other thing is to get some longer machine screws as it's unlikely the existing ones will be long enough. They're typically 25mm so 30mm should work well.
The hole is an M3. I have added a single layer to bridge the hole so it doesn't need supports there. Just run a 3mm drill bit through the holes. I printed face down to minimise support material but you could flip it if prefered.
Feedback is welcome.