1 / 5
e3D V6 mount for Velleman Vertex K8400 single head
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You will need 2 M2x15mm screws for the e3d head and you must drill to 3mm the old little fan screw holes for pass thru…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need 2 M2x15mm screws for the e3d v6 hotend and you must drill to 3mm the old little fan screw holes for pass thru with the m3 screws.
wenn you are using the fan duckt you have to lower the fan speed to about 8% and leave it completely off for the first layers
Print Settings
Printer:
K8400
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
20
Post-Printing
finish
Sanded and painted
Category: 3D Printer Parts