1 / 2
Prusa MK4 electronics box cover with fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover of mk4's electronics box with 40 mm fan made mainly for MK4s, that are enclosed.
- Rating
- 4.833 / 5
- Likes
- 27
- Downloads
- 122
- Makes
- 7
- Views
- 1,037
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Cover of mk4's electronics box with 40 mm fan. Made mainly for MK4s, that are enclosed in some box, like the lack enclosure mod.
I used noctua 40mm. Also, it is good to use heatsinks on the drivers as well, so the fan can blow the air at it and increase efficiency.
Design uses original mouting holes and nuts, and 4 additional M3 nuts and M3 screws. Length of the screw depends on your type of the fan.
Do not print with PLA, since it may not withstand the higher temperatures.