1 / 1
HueForge running Koopa
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Yellow
At layer #39 (3.2mm) swap to Green
At layer #57 (4.64mm) swap to White for the rest.