HueForge Mario jumping
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Mario jumping
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 73
- Makes
- 0
- Views
- 646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyTerra Pastel Candy Transmission Distance: 2.5
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyLite White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Sapphire Blue
At layer #25 (2.08mm) swap to Brown
At layer #37 (3.04mm) swap to Wine Red
At layer #44 (3.6mm) swap to Pastel Candy
At layer #45 (3.68mm) swap to Pastel Peach
At layer #48 (3.92mm) swap to White for the rest.