TP-Link Tapo C100/C110 mount for Elegoo Neptune 4 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix that fixes the main mount clip to fit the Elegoo Neptune 4 Pro printer
- Rating
- 4.25 / 5
- Likes
- 55
- Downloads
- 326
- Makes
- 2
- Views
- 2,153
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
How to
Print all the gcode files or more explicitly:
2 x nut.stl
1 x arm.stl
1 x base.stl
1 x mount.stl
arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed
Preparing the Tapo
The Tapo is coming with its own "foot-type" mount. To use it with this printed mount, the foot needs to be removed.
Bend the leg so the ball snapped into the foot is going out if the housing.
Pull the small rubber thing from the bottom of the ball.
Find the small screw in the ball / leg and unscrew it.
Plug the remaining "short leg" into the printed mount.
Add the screw you removed in step #3 to fix the short leg in the printed mount.