HueForge Yoshi running
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Yoshi running
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 35
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA PolyLite White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Wine Red
At layer #28 (2.32mm) swap to Sunrise Orange
At layer #51 (4.16mm) swap to BambuLab Green
At layer #63 (5.12mm) swap to White for the rest.