HueForge Bob-omb
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Bob-omb
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 27
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Pro Dark Purple Transmission Distance: 0.3
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA PolyTerra Army Light Green Transmission Distance: 0.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Dark Purple
At layer #26 (2.16mm) swap to Ice Blue
At layer #34 (2.8mm) swap to Army Light Green
At layer #44 (3.6mm) swap to Orange
At layer #52 (4.24mm) swap to White for the rest.