1 / 1
Angle Grinder Key - Parametric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angle Grinder Key (short, long and parametric) 30x4mm (centre to centre distance and diameter) 2 M4 screws needed.
- Rating
- 4.667 / 5
- Likes
- 45
- Downloads
- 182
- Makes
- 2
- Views
- 637
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The model needs two screws M4. I've used 20 mm long screws. Better longer screws than shorter, if the centre to centre is 28 mm with longer screws you can adjust the tool.
I've uploaded a parametric version for Freecad. Every dimension of the model can be changed.