HueForge Yoshi Tongue Shoot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Yoshi Tongue Shoot
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 48
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Magenta Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Kexcelled Fluorescent Green Transmission Distance: 4.6
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Wine Red
At layer #33 (2.72mm) swap to Magenta
At layer #35 (2.88mm) swap to Sunrise Orange
At layer #42 (3.44mm) swap to Fluorescent Green
At layer #65 (5.28mm) swap to White for the rest.