Glue Gun holder compatible with Ryobi Link
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.40 – €2.93 net (excluding VAT)
For file: GlueGun_Holder_Link Cleat_0.4n_0.2mm_PETG_MK4_2h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.67 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 2.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Because everything should be Link mountable
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 106
- Makes
- 1
- Views
- 578
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Different sets of holes let you can decide the mounting height.
Two M4 16mm and one M4 20mm screws are required (do not use super-glue)
When you print the cleat, in PrusaSlicer, unlock the scale factor and increase Z to 16.5 or 17.0 (making the part taller). This provides a more snug fit in the link rail, so pulling the glue gun out of the holster won't remove the entire mount from the link rail.
Strongly suggest using PETG (pictured using OVERTURE PETG Grass Green)
See another version of the glue gun holder here…
https://www.printables.com/model/1032143-glue-gun-strait-holder-compatible-with-ryobi-link
Don't have a 3D printer yet? That's OK, order already printed from…