1 / 1
Mario Lakitu Spiny Egg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A full size and broken apart model of the spiny egg from Mario. A remix of @bpitanga model on Thingiverse.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 100
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
Remix of @bpitanga Lakitu model to be used for a cosplay. I increased the size of the spiny egg (red spiky ball) and added dowel style pins to hold the ball together. The individual parts can be scaled. Current sizes are optimized for a Prusa Mini.
Assembly is pretty basic. Strong epoxy or a similar adhesive will be needed.
- Print both ball halves. Print 12EA of the spikes. Print 5EA of the pins.
- Epoxy the 5 pins in one half of the ball.
- Apply epoxy on the other end of the pins and press the other ball half over them.
- Epoxy in the spikes. I did these 1 at a time with the ball resting on a bowl/cup to keep the current spike upwards because gravity would move them off-center.
Thank you and enjoy the print!