HueForge Goomba [Multicolor]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Goomba [Multicolor]
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 31
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Army Beige Transmission Distance: 0.5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Brown
At layer #21 (1.76mm) swap to Lava Red
At layer #46 (3.76mm) swap to Army Beige
At layer #52 (4.24mm) swap to Savannah Yellow
At layer #68 (5.52mm) swap to White for the rest.