HueForge Pikachu sleeping [Multicolor]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Pikachu sleeping (I call him Sleepachu lol)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 36
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Protopasta Blood of My Enemies Transmission Distance: 11
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Pro Metallic Bronze Transmission Distance: 1
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Charcoal Black
At layer #19 (1.6mm) swap to Blood of My Enemies
At layer #53 (4.32mm) swap to Earth Brown
At layer #54 (4.4mm) swap to Red
At layer #61 (4.96mm) swap to Metallic Bronze
At layer #67 (5.44mm) swap to Savannah Yellow
At layer #72 (5.84mm) swap to Lemon Yellow for the rest.