HueForge Charmeleon [Multicolor]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Charmeleon [Multicolor]
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 367
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
PLA Kexcelled Fluorescent Orange Transmission Distance: 6.5
PLA PolyTerra Sakura Pink Transmission Distance: 2.8
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Azure Blue
At layer #38 (3.12mm) swap to Vermilion Red
At layer #40 (3.28mm) swap to Vermilion Red
At layer #46 (3.76mm) swap to White
At layer #50 (4.08mm) swap to Fluorescent Orange
At layer #51 (4.16mm) swap to Sakura Pink
At layer #54 (4.4mm) swap to White for the rest.