Prusa MK3 Reverse Bowden Frame Bracket - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of "Prusa MK3 Reverse Bowden Frame Bracket" by Steve Peterson (Thingiverse) - add rounded feed hole on the bottom.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 63
- Makes
- 2
- Views
- 376
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed with PETG, 0.15 layer height (better / cleaner threads), infill 15%, 6 perimeters (overkill maybe).
Per Steve's original instructions …
"Replace the two M3x10mm screws that normally hold the upper Z rod bracket with two of the spare M3x18mm screws that came with your printer along with two M3 lock nuts to secure.
Note: the printer frame ends up sandwiched between the upper Z rod bracket and the reverse bowden bracket (see photo).
The threads are set up for the PC4-M10 couplers."
Thanks to Steve for including the .step file so I could update the design (in Fusion 360). In the same sharing spirit I included my .step file too.