1 / 5
Voron Trident Bed JST-XH Breakout for thermistor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY breakout board with mount for Trident Bed thermistor
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 762
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Assembly:
- Cut the breakout board. (distance between holes for screw is 9x2,54mm)
- Solder two JST-XH connectors to the universal PCB and make connection between pins
- Add M2,5 thermal inserts to the mount
- Mount the board with two M2,5x4mm screws
- For mounting to the extrusion use 2x M3 T-nut and two M3x10mm screws