1 / 3
Hexagon Medal Hanger - The Conqueror Challenges
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modelled up a replica of the wooden hangers you can buy for The Conqueror Challenge medals
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 726
- Makes
- 7
- Views
- 3,957
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple enough print. Might print them again if I ever get some wood filament but the marble effect is nice too.
Uses 8mm x 3mm neodymium magnets. There's space for 4 in each hanger but I only used 3. You could probably get away with just the top two.
I mounted mine using command strips. If there's call for it, I can upload one for screws.