Qube 500 EK-Quantum Kinetic TBE 200 D5 PWM D-RGB Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.25 – €2.75 net (excluding VAT)
For file: Qube 500 EK TBE 200 + Clamps_0.4n_0.2mm_PETG_MK4IS_2h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.50 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 2.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This includes a mount for the EK-Quantum Kinetic TBE 200 D5 PWM D-RGB and a hose clamp for water cooling.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 31
- Makes
- 0
- Views
- 1,021
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
An easy way to mount you water cooling on the outside of your computer case.
You need to print two Qube 500 EK TBE 200 Mount. They need to be mounted according to the 2 where the mounting holes are places away from the center. They can be mounted with the M4x10 DIN7984 screws that comes with the pump or at least a M4x6 DIN7984.
There are added a hose clamp for OD16 mm. Normally 4-6 should be sufficient but that depends on how your pipe/hoses are routed.
In the gcode there are 4 clamps and two mounts.