RTX 4090 FAN MOD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mod of the RTX4090 founder's edition's Fan,this will help you to apply it as a Chassis fan.A FANDUCT FOR RTX4090 FAN
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 231
- Makes
- 0
- Views
- 2,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A mod of the RTX4090 founder's edition's Fan which is cheap but high quality you can buy.this will help you to apply it on chassis or a radiator This is a free open source mod for All Diyers,you can download the file and 3D print it.
For users: You're expected to prepare these items listed below to finish assembling
1.kafter k-705 glue or any other glue you want to apply on the assemble
- m3 or m3.5 screw(length~20mm) for mount on chassis or radiator
define of the FPC pins: face to the pin side,upward,THEY ARE +12V,+12V,PWM,GND,FG,GND. connect one pare of the +12v and GND and it is good to go
have fun 中文 RTX4090风扇MOD适配模型
安装须知
1.卡夫特705硅橡胶（用于风扇和框架的固定）
- m3螺丝，长度20mm左右，用于风扇与机箱的固定
FPC针脚定义：面对金手指，排线指向上方，依次是 +12V,+12V,PWM脉冲调速信号，接地，测速线，接地
欢迎下载