Tripod Shelf (mutli-purpose)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tripod shelf (mutli-purpose)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a tripod shelf that i made for my portable projector setup.
I don't have a dedicated ceiling or wall mount and i was fed up with having put everything away one cable at a time. A shelf seemed like a good idea and it was! I can now simply pick all of it up and move it into a cupboard out of view.
Dimensions:
- Holes: 8mm
- Shelf: 170mm x 130mm x 5mm
Print Settings:
- Resolution: 0.6
- Material: PLA+ (PLA is fine)
- Infill: 15%
- Walls: 4
- Bottom & Top Layer: 3
- Supports: Very small amount needed for the arch, or do what i did and roll up a post-it.
- Print Orientation: Holes facing down
Assembly:
You will need to print 2 of these shelves in order to asseble this setup.
You will also need Some M8 bolts and nuts so that you can attach the shelves together. I just found a load of random nuts and bolts in the toolbox so you might be able to do the same.
My Equipment:
- Tripod: Manfrotto (column diameter 40mm)
- Printer: Ender 3 V2 Neo