Hobby Knive Cap for wide Blades
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.30 – €0.37 net (excluding VAT)
For file: Exacto cap wide_0.4n_0.3mm_PETG_MK4_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 24 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement Hobby Knive Cap
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 1
- Views
- 145
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet another Hobby Knive Cap.
The ones I tried did not fit the wider blades I often use, so I decided to design this one.
The wider shape also prevents the knive from rolling of the table.
Print parameters:
- PETG
- layerhight 0,3mm
- print standing on the open end
- Brim might be needed
- designed for 0,4mm nozzle