1 / 3
PSU switch flip cover, filament hinge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little flip up/down cover to prevent accidental PC shutoffs
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Doublecheck your PSU and orientation. Some PSU's have their power cable connector too close so you need to print “left” or “right” bottom. Gap needs to be more than 2mm for “full”.
Print on sides with supports for best results. Text is most legible that way and the hinge will be strongest. May require some X-acto blade action depending on your tolerances and supports.
Cut off a piece of filament just longer than the total width. Insert through and fix with either super glue or melt the sides with an old soldering iron. Use super glue to fix to PSU back