1 / 1
1 Inch NTP to 1.25 Inch connector — image 1

1 Inch NTP to 1.25 Inch connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1 Inch NTP to 1.25 Inch connector, typically used for pools hoses

Rating
0 / 5
Likes
5
Downloads
93
Makes
0
Views
384
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Noncommercial

I couldn't find the part I needed to connect a 1 inch solenoid valve to my 1.25 inch pool hose. Since Fusion can't make NPT threads, I pulled the design from McMaster-Carr with the correct size NTP threads, and modifed the outlet for 1.25 inch hose and a custom, but printable, O-ring.

Print the O-ring in TPE/TPU and the main unit in PETG at 0.2 layer height. I printed with enough perimeters to make it solid with no infill. Print the adpater with the non-threaded end in the plate. The o-ring is optimized with an angle on once side to fit the adapter with the same angle.

Tags