Bed side phone holder - with parametric design
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.70 – €10.63 net (excluding VAT)
For file: Phone_holder_0.4n_0.15mm_PETG_MK4IS_9h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.66 excluding VAT (range midpoint).
- Weight reported by the author
- 135 g
- Print time reported by the author
- 9.42 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This phone holder allows to store your phone on the bed sides. The parametric modeling allows to change the phone model
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 122
- Makes
- 2
- Views
- 665
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- GNU General Public License v2.0
If you have no place to place your phone when sleeping and you are tired to search it on the ground when the alarm goes, this model is for you. You can change the parameters in fusion360 (see below).
Features a slot for your USB charging cable and an opening to grab the phone easily.
Simply go to the model parameters to change the bed frame size (mine is 30mm), the width (thickness) of the holder, the phone width, length and the depth you want for the phone.
The best print obtained with PETG was laying on the side where there is no opening for the charging cable, use of skirt and extra support. Little to wrapping in this position, and quite strong hold.
Some G-Code added for the new prusa MK4 IS