1 / 5
Baldur's Gate 3 Logo Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Originally uploaded/created by @Boos. I trimmed the bottom layer and painted with layers to support my AMS
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 115
- Makes
- 0
- Views
- 817
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please refer back to the original posts for non-ams filament swap instructions - https://www.printables.com/model/566681-baldurs-gate-3-logo-filament-painting-hueforge
Filaments Used w/ Rough Layer Height:
- PLA Matte Charcoal (11101) - Bambu Lab
- 0 - 0.57
- PLA Matte Dark Red (11202) - Bambu Lab
- 0.58 - 1.96
- PLA Matte Scarlet Red (11200) - Bambu Lab
- 1.97 - 2.46
- PLA Silk Gold (13410) - Bambu Lab
- 2.47 - 3.82
- PLA Matte Charcoal (11101) - Bambu Lab
- 3.82 - 3.88
Relevant Printer Settings:
- 0.4 Nozzle
- Textured PEI Plate
- 0.08 Layer Height
- 25% Infill - Gyroid Pattern
- This can be higher or lower - @Boos recommends 100% infill
Real World Scale
For scale reference each hex in my photo is a typical TTRPG playing mat so they are 1" across
Sorry for the poor photo quality my phone is quite old \_(ツ)_/