City of Heroes - Invention Mobile Worktable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your own nostalgia gaming artifact from City of Heroes - the much sort after mobile invention worktable
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 39
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
The Invention Table from City of Heroes MMO was a highly desirable achievement you could unlock after you crafted an insane amount of items on the normal static workbench.
This model is a visually inspired scaled down replica from the game including a lighting array and stand (unfortunately I couldnt figure out how to make it float).
I've made a small video showing the 1st main body construction (camera gave up :( ) and a glimpse of its design elements and final product: City of Heroes Mobile Worktable
For the printed parts you will need:
- A printer that can print 254mm on x & y
- 3 filaments (1kg translucent, 2kg of main colour, 1kg accent colour)
- CA glue and accellerator
- 6x 3mm zip ties
- Patience
For the Lighting you will need:
- RGB led 10mm 3 pin strip light with two outputs and an ir sensor - ideally with cut lengths shorter than 100mm (amazon link)
- A soldering iron, solder.
- Various cable connectors (amazon link) (6x T connectors, 5x corner connectors, 1x strip to strip connector)
- Wire to strip connectors (amazon link) (30x)
- 3 wire cable (amazon link)
Printing advice:
Most parts are obvious to their orientation, I used “auto” on the orientation for most parts in the slicer. Inside the Alternate files folder you'll find two 3mf files: Inventiontable.3mf (Bambu sliced complete project) and Supports.3mf (prusasliced file for the special items).
General rules - gyroid 10% infill, 2 perimeter walls, tree / organic supports where needed (see below), arachne perimeters.
Vial Holder - printed on its end with support blockers enforced on the legs and support enforcers for the main body, this orientation puts the rough support side pointing to the unseen inside (See the Alternate files > Supports.3mf).
Controller body - support blockers for the central hole, support enforcers on the underside of the large recessed overhand and on the underside of the central spindle (See the Alternate files > Supports.3mf).
Special shout out to @thrutheframe for creating the clip which i've used in this model for the base, thanks!
Construction Instructions:
Main Body Assembly
- Gather the 6 main body parts (4x blanks, 1x up, 1x down), 6 Arc clips, your cable ties, lighting kit controller and Inner ring.
- Dry fit the body parts together to make sure the plug and sockets line up
- Dismantle, install an arc-clip on the right side of the Downbody, the upbody and one blank body, connect them together in that order, with the down body furthest left, upbody in the center and the blank body on the right.
- Fit arc-clips to the other 3 blankbodys and build the 2nd half
- Connect the two halfs together
- Install cable ties in the central tie holes to pull the body assembly tight together
- Take your light controller and feed up through the internal body hole the IR blaster and one of the led strip connector cables
- Slot the IR blaster in through the upbody wall hole so that the lens is poking out on the outside of the body, the IR blaster may need some light trimming to make it fit in the hole
- Slot in the InnerRing to link all the body parts together, this should fit flush across the top surface and helps secure the IR blaster in place.
- Glue in the controller housing to the base assembly
- Using the double sided strip from the lighting kit, stick the controller into the controller base.
Top Fin ring Assembly
- Put the main assembly to one side and get the fins, and the top ring halfs pieces ready (if you have a printer with a build plate larger than 250mm then use the alternate top ring model)
- Glue the two middle fins into the top ring halfs - the middle two. Do not glue the outer overlapping two yet. Set these aside for the moment.
Side Controller Assembly
- Gather the led strip, the 3core wire, 6x side controllers, 6x side controller lens and 6x side controller lens spacers.
- Cut 6x 100mm led strip and solder on a 100mm length of 3core wire to the starting end of the strip.
- Ensuring you are consistent, stick the led strip onto the spacer counterclockwise for all 6 led strips.
- Mark up the positive wire end and feed them through the side controller base slot from the spindle to exit out the large face, repeat for all side controllers and lens spacers, push the lens spacers onto the spindle with the flat side up, this just friction clips into place and the wires should very tightly fit down the hole.
- Using the cut out as a guide, friction fit the side controller lens over the spacer and snug it up against the side controller body, it clipped fully home when i built this.
- Be warned, do not attach the side controller disks yet, leave that till you've tested everything.
- You should now have 6 side controller assemblies ready to attach to the main base assembly.
Vial Controller and Base Assembly
- Gather your vial holder assembly and your base assembly
- With the unit upside down slot the controller legs into the very tight fitting holes in the base
- You will need to push each leg down through the slots a small amout at a time, be very controlled and keep the legs evenly pressed in or they'll snap
- Push the legs through the body to allow around 3 mm protruding on the inside of the base
- Repeat this process for the other 5 vial holders
- Glue on the base plate.
Side controllers and Base Assembly
- Gather your side controllers, the base assembly, 6x T junction strips, 17 strip to wire connectors, 1x strip to strip connector, lighting strip, wire
- Attach a strip to wire connector on the middle arm of the 6 T Strips
- Cut the lighting strip at the first junction and attach the strip to strip connector, link this to the left arm of a T strip connector
- Attach strip to wire connectors to all the remaining T arms
- Cut 6x 80mm wire lengths
- As we want all the lighting to be on the inside of the main dish, we must twist the connecting wires round to keep the strips facing the right way. Take one of the wire lengths, seperate the ends and connect to the lighting connected T right arm.
- Take a second T and twist the wire from the lighting T to ensure Positive lines up correctly to keep the positive wire entering the next T left arm in the right location.
- Repeat this process for the remaining T connections, you should have 6 T's with lighting connected on one end and an empty wire connector on the other end, All wires should have a twist on them. When lying this flat with the lighting T aligned to you - the rest should also T in the same direction with a twist in the cable. Put this lighting loom to one side for the moment.
- Grab a side controller. Dry test fit this to the base unit, threading the wire through the slot for practice, it is important to note that the positioning of these is vital for the end top mounting, take your time and see how it slots together, the side should be flush with the sides of the body
- When you're ready, CA glue the controller bottom and back in a U shape
- Use accelerator on the main base mounting point and slide the wire from the side controllers into the base
- Seat the side controllers as accurately and as correctly as possible, the accelerator will set this in seconds, if in doubt, do not use the accelerator.
- Thread the wire down through the body to exit into the main bowl chamber.
- Repeat for all side controllers
- Connect the side controller wires to the T wiring loom, with the finishing open one being near the start, see the pictures for more details on the exact positioning.
- Put some strong doublesided tape on all the wire connectors (except the last one!) and affix the the loom to the chamber base, this should mean your last connector is free floating to get at easier.
- Test it, all the controller lens should flicker and be bright, if you have dim or always on leds, work from the 1st not working light and wiggle the connectors, you may need to replace the connectors if they are damaged.
Central chamber lighting
- This stage is a bit tricky, this is the order I built it in, but it may be beneficial to perform this before step 15 of the previous section
- Gather an additional strip to wire connector
- Uncoil the remaining led strip,Connect a strip to wire connector to the starting point
- Using the remaining 80mm length of wire from the last section, connect the lighting to the T wiring loom
- Run the lighting behind the T loom controller cables and power cables, you should be able to get 2 rows below the controller wires and 2 above, a total of 4 circuits around the inner chamber walls. This is a mega pain
- I found after the first loop was threaded in, peeling and sticking the loop down helped manage the next loops, repeat this till you run out of space, cut it short if you need to.
Top fins and workbench lens
- Gather the two top ring halfs (with fins attached), the two unconnected fins and the workbench lens
- Run a small bead of CA glue onto the two central fin points and place the fins on the body opposite each other.
- Run a bead of CA round one half as per the picture, don't go overboard here as you dont want the glue showing on the final assembly
- Take one of the half rings and mount it to the main body - the ends which meet the fins you just glued in will be a snug fit and you may have to wrestle them into place based on your printer tolorences, see photos (ring and keystone).
- Worth noting, make sure the side controller triangles at the top are inside the rings, they should clip in with a bit of force
- Slide the lens into place from the open side
- Run a bead of CA glue on the 2nd side and fit the 2nd half ring to the opposite side, again a snug fit and wrangling required, make suire those triangles snap into place well.
- Let it set.
Vial lighting and Assembly
- Gather the 2nd led strip from the kit, the wire, 6x vial holders and the main base, 9 wire to strip connectors, 5x L strip connectors
- Cut the led power connector at the first cut point.
- Cut more Led strip into 6 pieces of 200mm length
- Cut 11x 120mm wire lengths
- Solder a 120mm of wire to each end of the 200mm led strip, the last 200mm led strip only needs 1 length of wire attatching to the starting side.
- Mark each wire for positive on its open cut (non soldered) end
- Grab a vial lighting loom and feed each of the wire lengths down each leg of the vial holders until the led are pretty much in contact with the vial holders
- Remove the gluestrip and fold the 200mm led back on itself to create a 100mm double sided striplight
- Slot the led into the a vial and press it home into the holder, this can be friction fit. Repeat for the rest of the vials and controllers, you should end up with 6x vial assemblies with 11 wires sticking though into the underside chamber.
- Connect 2 strip to wire connectors to each L strips.
- Grab the LED starter cable and connect a wire to strip connector to it
- Plug it into the controller connector and loop it up behind the controller to present near the 1st of the wires
- Connect the lighting start loom to the vial holder leg marked 1 on the base
- Connect the L connectors to all the remaining wires to create a continuous line round the vial connectors
- The last vial only has a wire connector going to it, the exit leg is empty.
- Carefully slot on the vials and friction fit them home, make sure you support the vial holder as you press the vial home, would be a shame to break it on the last step…
- Plug the holes at the bottom of the vial holders with a vialplug and some ca glue.
Slot it onto the stand, plug it in and turn it on, marvel at your achievement unlock!!!