Adjustable Rope Clamp Rope Tensioner (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pick the size you need or open the f3d-file in Fusion360 and change the rope diameter as you need it.
- Rating
- 4.938 / 5
- Likes
- 828
- Downloads
- 3,074
- Makes
- 20
- Views
- 10,492
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”.
There you can change the parameter for the diameter of the rope.
The diameter has to be at least 3.1mm, otherwise the calculation will fail. Don't touch the "Tolerance"-Parameter.
For those that are not familiar with Fusion360 I uploaded the model in sizes from 3-12mm rope diameter.