1 / 2
Prusa Enclosure Filament Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fills hole in top of enclosure with filament pass-thru
- Rating
- 4.75 / 5
- Likes
- 39
- Downloads
- 246
- Makes
- 9
- Views
- 1,302
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Simple filament guide for single color printing.
Printing parameter:
- Material: PETG
- Resolution: 0.1 mm
- Perimeters: 0
- Infill: 15%
- Supports: no
Assembly:
Press fit two M3n nuts into the bottom piece. Put top piece in the hole in the center of the enclosure lid. Use 2 M3x8 screws from the top to sandwich the enclosure lid between the two parts.