1 / 3
Peanut butter bird feeder for NABU-peanut glas — image 1
1 / 3

Peanut butter bird feeder for NABU-peanut glas

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for NABU peanut butter glasses, 78mm diameter x 100mm height.

Rating
0 / 5
Likes
4
Downloads
28
Makes
0
Views
324
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The feeder is designed for the NABU peanut butter glas, which is 78mm in diameter and 100mm high. Please check if glasses in that size are available for you. The diameter may be a little bigger, the 100mm in height may not. 
The roof is sliding from the backside on the base plate. The 3 pins are pressed into the grooves (tight fit, you will need some pressure) and fixed by 3 screws 4x30 mm from the backside.
The glas needs to be layed onto the pins along with the support, which fits into the grooves in the pins. This keeps the glas in place and gives a seat for the birds.

Printed with PETG, 0.2mm layer, 0.4mm nozzle. Supports are only needed for the support. I used organic supports.



 

Tags