Go-Pro style mount for 17x9mm LED channel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Go-Pro style mount for some 17x9mm LED channel.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 65
- Makes
- 1
- Views
- 351
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Some simple go-pro style mounts for aluminum LED strip channel (17x9mm).
Originally I had used a narrower design, but I found them to be too brittle, even when printed in PETG. This is a wide-body version that does the job well and provided ample room to allow for adjustment.
This should provide roughly 60 degrees of tilt in either direction, allowing for a range of lighting. I find that you will need one of these every 18 inches or so to keep the rail from flexing when being moved.
These should be printed solid. Unfortunately this design does not lend itself well to being printed on it's side, so some amount of support material will be needed.
Install these from the end of the channel, rather than snapping them over the back of the channel. this will avoid any chance of over-flexing the part and breaking it.
This is part of my larger Lack Enclosure build collection (coming soon).