DeWalt 20v Cordless Drill DCD771 Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mount for you DeWalt DCD772 20v cordless drill.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 58
- Makes
- 1
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a wall mount for the DeWalt DCD771 20v cordless drill. It has two vertically spaced 4.5mm holes, so you can mount it to a stud using #9 x 2" deck screws, or similar.
There are two versions of the back plate:
The heat set insert version will require 4 m3x10mm socket head cap screws and 4 m3 heat set inserts. The holes are 3.9mm diameter and 6mm deep, so will fit the common m3 heat set inserts, such as those used in the Voron 3d printer builds.
The direct thread version of the back plate isn't as strong, but doesn't require heat set inserts. The holes are 2.9mm dia, which should allow the m3x10mm screws to thread directly into the plastic.
For colored text infill, simply switch filament at the appropriate layer.
I havn't test printed/fitted this yet. Once I have done so, I will remove this disclaimer but intil then, be aware that you could waste material should this not fit.