Breville Cafe Roma replacement knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print and assemble replacement knob for the Breville Cafe Roma espresso machine.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 133
- Makes
- 1
- Views
- 750
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
An easy to print and assemble replacement knob for the Breville Cafe Roma espresso machine. The original knob is notorious for breaking off (thin plastic) and Breville just would not send us a replacement part, even if we offered to pay. In any event, print this out of PLA, PETG or another strong easy to print material. You can also use SLA methods (or CNC!) if you prefer. In terms of printing, use 4 perimeters, 0.15 layer height, 25% infill. You will need to add some small support on the bottom using the support enforcers in prusaslicer around the screw holes.
For assembly, pry off the black plastic plate and insert it into the 3d printed part. Use the original screws to tap into the plastic and secure it. Finally, push it back into the espresso machine (it is keyed, orientation matters).
Happy brewing…!