1 / 4
Dethleffs water fill cap 75mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap to connect a gardena gardenhose to the inlet of the watertank (2006 Dethleffs, approx 75mm)
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 174
- Makes
- 0
- Views
- 956
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Cap to connect a gardena gardenhose to the inlet of the watertank (2006 Dethleffs, approx 75mm)
Inspired by the cap by @ralphH_793590, which doesn't fit my caravan. (https://www.printables.com/model/473610-dethleffs-water-fill-cap), but drawn from scratch.
My first project using Fusion 360. Used a thread to mount both parts together. Printing it as one piece would be more difficult.
Used 15% infill. For the first part, I used 100% infill for the first 7.6mm and support to get a better surface on the inside.