Ender 5 Plus with Biqu H2 V2S Linear Rail Conversion Kit

This is a X and Y axis linear rail conversion kit for the Ender 5 Plus with Biqu H2 V2S extruder. It is designed to be durable, low profile and lightweight.

A durable and heat-resistant material should be used, PolyMax Polycarbonate is strongly recommended. It is recommended to print with thicker walls (e.g. 5) and higher infill of 50-80% for strength purposes.

The Y-Axis belts will need to be replaced, but the X-Axis belt and be re-used. Use soft jaw pliers or alternate technique to press in the hex nuts for the Y-Axis carriages and the BLtouch mounting location. Use a minimum of 2 centering jigs per rail to ensure proper alignment, square the X and Y axis when performing final tightening.

Probe offset is X-35.30 Y+5.25.

Printed Parts Conversion Kit:

• Front Mounting Plate (Original)
• Rear Mounting Plate (Original)
• Cable Holder Guide (Original)
• (2) of Y-Axis Linear Rail Mount (Remix)

Printed Parts Needed by Others:

• X-Carriage Conversion Kit by BongoDaddy
• MGN12 Linear Rail Centering Jig by mjbudden
• X-Axis Limit Switch by Jacob_115744
• Y-Axis Limit Switch by Jacob_115744
• BLtouch Bracket V5.5 by JLCURTIS

Required Hardware:

• (3) of MGN12 450mm Linear Rail
• Button Head Hex Screws
  • (8) of M5x12mm
  • (2) of M3x10mm
• Socket Head Hex Screws
  • (2) of M4 x 14
  • (2) of M4 x10
  • (1) of M3x12
  • (3) of M3 x 10
  • (30) of M3x8
• Hex Nuts
  • (2) of M5 Hex Nuts
  • (2) of M3 hex nuts
• 20 Series T-Slot Nuts
  • (12) M3
  • (3) M4
• M4 and M3 heat inserts
• Y-Axis Belts
• Belt Buckle Clamps

Optional Parts:

• 2020-1 Y Axis Tensioner
• Biqu H2 V2 Nozzle 5015 Fan Duct by Taeky
• 5015 Blower Fan

Tools:

• Soft Jaw Pliers
• Allen Key Set
   

Note: Amazon links are affiliates.